- About Peak
Peak glazed roof options offer a proven, cost effective solution for a variety of applications. Developed to provide a high quality answer to many fenestration requirements, it offers total flexibility in specification.
The glazed roof’s can be either single or double glazed for improved thermal and acoustic performance.
The systems offer a range of rafter depths to cater for differing structural conditions. A range of window inserts are available as well as a range of external caps to vary the finished appearance.
Our glazed roof options consist of either a box or a box and plate format for factory frame assembly using mechanical methods at butt joints. Assembly uses stainless steel or plated self tapping screws into either cleat blocks or integral screw ports extruded into the body of the sections, directly through square cut adjoining component parts.
Rafter sections are designed to run through. This enables individual panels to be made separately, easing the problems associated with handling and transporting large or multi-panel frames when fully assembled. The system may be glazed using dual gaskets or a combination of tape and gasket to suit individual performance requirements.
Our glazed roof products are thermally broken and compartment drained which offer performance characteristics in line with the highest requirements of the industry. When tested in accordance with the procedures laid down in BS5368: Parts 1, 2 & 3, the products achieved the following classification for weather resistance as defined in BS6375: 1989. Air permeability, 600Pa. Watertightness, 600Pa. Wind resistance, 2400Pa.
The various roof glazing options are designed to accommodate various glazing options from 6 to 10mm for single glazing and up to 34mm for double glazing. Glazing must satisfy safety recommendations and withstand the calculated design wind pressure for different types of location. All glazing must comply with BS6262 and BS952: Part 1.
All Peak glass roof systems are available in a full range of polyester powder or anodised finishes.
Stoved polyester powder coated in accordance with BS6496, available in a large range of single RAL colours, Self colour or Anolok anodised in accordance with BS EN 12373 and BS 3987
Our design, installation and glazing service is available nationwide.
Our technical support department can provide comprehensive technical advise and standard drawings as hard copy or disk.
Test reports are available on request.